• Norway - English [ change ]

    E-mailEmail

    close

    We're pleased that you want to share this information. To send a link to this page, fill in the information below. The e-mail will show you as the sender and will show your return address.

    * indicates required information

    * Recipient E-mail:

    Each address entered must be valid.
    (Separate multiple email addresses with commas. Limited to 5 addresses.)

    * Your Name Here:

    Enter your name.

    * Your E-mail:

    Enter a valid address.

    send a copy to me
    Note: You are not adding recipient email addresses to any promotional email list.

    Sending...
    Sent!
    Send failed. Please try again later.

    Aqueous & Solvent Coating

    Aqueous & Solvent Coating banner

    Gravure Coating

    Direct and offset gravure coating capability is available at both small and intermediate scales.

    Small-scale capability can create rolls of coated material at 6" width on paper or plastic webs. This process uses as little as 300 g of solution. A variety of gravure cylinders are available to get you the coverage that you desire.

    Intermediate-scale capability can create rolls of coated material at widths up to 16" on paper or plastic webs. This process typically requires a minimum solution volume of 5 gallons. A variety of gravure cylinders are available to get you the coverage that you desire.
     

    Slot Die Coating

    Slot die coating capability is also available at both small and intermediate scale.

    Small-scale capability can create rolls of coated material at 4" to 9.5" widths on paper, plastic, or metal webs. This process uses as little as 300 g of solution. Metered delivery systems allow you the freedom to select whatever coverage you desire.

    Intermediate-scale capability can create rolls of coated material at widths up to 16" on paper or plastic webs. This process typically requires a minimum solution volume of 5 gallons. Metered delivery systems let you select whatever coverage you desire.
     

    Slide Hopper Coating

    Slide hopper (cascade) coating capability is available at both small and intermediate scales.

    Small-scale capability can create rolls of coated material at 4" widths on paper or plastic webs. Coatings of up to 8 layers can be coated simultaneously using as little as 150 g of solution for a given layer. Metered delivery systems and independent temperature and humidity control on the dryers allow for a high degree of flexibility

    Intermediate-scale capability can create rolls of coated material at 4" widths on paper or plastic webs. Coatings of up to 8 layers can be coated simultaneously using as little as 400 g of solution for a given layer. Higher speeds and increased delivery system options allow for improved predictability of expected performance in full-scale manufacturing processes.
     

    Meyer Rod and Blade Coating

    Meyer rod and blade coating capability is available at intermediate scale with a 16" coating width. This process typically requires higher speeds and solution quantities of 50 gallons or more.
     

    Spray Coating

    High pressure spray nozzles can be arrayed in variety of configurations to spray coat a moving web. The delivery method includes the capability to use supercritical CO2 as the carrier medium.
     

    Coating Process Development

    Our flexible machine design can be modified so that you can bring your own application device and test its capabilities on moving web.